Support Documentation ClearBOX 100

ClearBOX 100

Differences

This shows you the differences between two versions of the page.

documentation:clearbox_100 [2012/04/16 12:14]
dloper
documentation:clearbox_100 [2012/04/16 12:50] (current)
dloper
Line 19: Line 19:
  
 For Inline Content Filtration Bridge support, you can just move the jumper of the first segment if you desire but if you move both it will not cause it to fail (you just won't be able to use eth2 and eth3 for management). For Inline Content Filtration Bridge support, you can just move the jumper of the first segment if you desire but if you move both it will not cause it to fail (you just won't be able to use eth2 and eth3 for management).
 +
 +You will know that the bypass is working by the state of the bypass indicator light next to the **eth0** jack.
 +
 +^ Indicator Light ^ Status ^
 +| Green | NICs on bypass segment are active and traffic to each NIC is distinct. |
 +| Red | NICs are being bypassed, the signal is being coupled. |
 +| Black | The NICs are physically unreachable/offline and the signal is not being bypassed. |
  
 ===== Mission Critical Gateway support ===== ===== Mission Critical Gateway support =====

 
TryBuy